Chassis

Used to remove Pitman Arm from Shepard Steering Boxes used in 6, 7 & 8 series HD trucks. Applications include: M80, M90, M100, M110, 292, 392, 492 & 592 boxes. Chevy / GMC, Freightliner, Kenworth, MAC, Navistar. Paccar, Peterbuilt, Volvo &...

This 4-adapter set is used in conjunction with the C-frame to remove and install ball joints on Lexus, Hyundai and Kia vehicles. Lexus 2006 GS300, 2007-2011 GS350, 2006-2015 IS250, 2016-2017 IS300, 2011-2017 IS350,...

Air Suspension Pressure Tester with Mercedes Benz adapter accurately displays the air suspensions pressure during service It helps detect leaks and/or irregularities in pressure throughout the air suspension system The gauge displays both PSI &...

Toyota Front Hub Nut Socket

Astro 78825 Master Front Wheel Drive Bearing Adapter Kit is a master set that allows you to replace wheel bearings without the need for alignment after, by keeping the strut assembly and steering knuckle in place during service. The kit includes heavy...

Checks ball joint wear and disc rotor run out Checks tire and wheel run out, gear backlash, valve guide wear, etc. Meets state inspection requirements Dust, water and oil resistant indicator features 0-1" travel, and .001"/.01mm graduations Includes...

Holds torsion bar while making adjustments Services 2011 and up HD C/K trucks Forged construction with bright blue body

The 20% Thicker Fork Design Provides Extra Lift When Replacing Worn Out Ball Joints, Pitman Arms, Pickup Track Bars and Other Includes five forks: 11/16", 15/16", 1-1/8", 1-7/16" and 1-5/8". Forks are threaded to interchange with either the handle for...

Releases the Lower Ball Joint on Audi A4 ('07 & up), A5 ('09 & up), A6 ('11 & up), A7 ('10 & up), Q5 ('10 & up). Allows the ball joint to be turned after releasing the pinch bolt. Features 1/2" square drive with 27mm hex & 18mm...

For removal of most types of pitman arms, tie rods and ball joints found on automotive and light truck applications.

Services Benz M-Class (W163/W164) Ball Joints. Black Finish With 3/4" Square Drive. Od--63Mm, Id--50MmServices Benz M-Class (W163/W164) Ball Joints3/4" Square DriveOd--63Mm, Id--50MmBlack Finish4 Pin Design

Use for removing and installing the top shock retaining nut on S40, S60, S70, S80, S90 models Includes holding socket and double-D axle center socket Double-D measures 8mm "flat-to-flat" Use 10mm hex wrench on top of Double-D socket Use 28mm hex wrench...