Diagnostic Accessories

Everything you can find in the TLK281 Automotive Test Lead Kit, plus a few extras. Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and MAP sensors. A hook probe with plunger actuation allows quick connection to pins...

One meter long test lead with a safety shrouded, right angle banana connector on one end and a stainless steel test probe on the other end, rated up to 10A. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high...

Tested to 60 V DC TP81 Insulation Piercing Clip Set TL224 Suregrip Silicone Test Lead Set TP220 Suregrip Test Probe Set AC220 Suregrip Alligator Clip Set AC285 Suregrip Large Jaw Alligator Clip Set Soft Case

Diagnostic cables for Tesla S and X vehicle models, enables Autel MaxiSYS 909, 919, or Ultra tablets to connect with Tesla S and X vehicles to activate factory mode and perform system diagnostics. Includes three cables: LAN001- Connects to Tesla...

High resolution, multiple aspect dual camera with super bright adjustable LED flashlight on both lens. Compact camera is only 5.7 mm in diameter by 58" in length. 3 display modes: front camera, side camera and front and side camera simultaneously. Long,...

High resolution 720P camera provides crystal clear video and image capture. Camera, lens and cable are IP-67 rated water/fluid resistance. Long, bendable cable (30"") is flexible yet rigid enough to give users access into hard to view areas. Ultra bright...

Sure Grip design so you can do your work comfortably. With interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4mm shrouded banana connectors. This handy all-in-one kit...

LOADpro finds corrosive resistance, shorts to ground and open circuits. Do voltage drops easier and faster and find wiring problems faster. Works with your existing digital multimeter.Includes LOADpro Test Leads LOADpro Tip Adapters Flexible Silicon...

11 amp, 1000 volt fuse for Fluke digital multimeters High-energy, fast-release fuse designed measuring current Sand-filled to reduce risk of breakage during current overloads

Yellow protective holster for all 80 series DMM's (new as well as old) General purpose hanger Hook and loop straps Hanging magnet

Banana jack accepts all DMM and banana jack leads Tested to 60 Volts DC

Insulated, nickel plated jaws Blunt tip grabs round screw heads up to 9.5 mm Recommended for use with modular test leads