Measuring

Accurate in Clockwise Direction +/- 3% from 20% to 100% of full scale Meets ISO 6789 Specifications and is calibrated on test equipment complying with accuracy requirements of ASME B107.300-2010 Meets or Exceeds ASME B107.14M 1994 Ratcheting Head Flexes...

Turns any ratchet or breaker bar into a 1/2" or 3/8" torque / angle measuring tool. Includes adapter from 1/2" to 3/8" Can be used to recalibrate any type of torque wrench. 30 memory settings for torque reading and 30 for angle reading. Peak and track...

Robust construction gives accurate results to ±4% even in arduous working conditions. The break-a-way action gives an unmistakable signal in the handle which can be seen and felt. The break angle improves accuracy by reducing the possibility of over...

Robust construction gives accurate results to ±4% even in arduous working conditions. The break-a-way action gives an unmistakable signal in the handle which can be seen and felt. The break angle improves accuracy by reducing the possibility of over...

Easy to Use Ideal for precision tasks Turn handle to select from 5 Preset Values: 80, 100, 120, 140 and 160 ft.-lbs. ±4% Accuracy 1/2" Drive Handle with comfort-grip material No ratchet head, to avoid breakage and encourage use for proper final torque.

Produces sufficient output torque to quickly remove stubborn, rusted or over-tightened lug nuts 1" square drive input, 1:58 gear ratio produces 2350 ft/lbs, 3200 nm pounds of torque Great for emergency road side tire removal, replacement, or repairs No...

+-3% CW & +-5% CCW accuracy. 200-1000 Ft/Lbs. and 271-1356 nm Exceeds accuracy range set in ASME B107314-2004 standards. 1" drive 24 tooth quick release reversible ratchet. Calibration Certificate included, 100% traceability.

+-3% CW & +-5% CCW accuracy. 100-600 Ft/Lbs. and 16--847 nm Exceeds accuracy range set in ASME B107314-2004 standards. 3/4" drive 24 tooth quick release reversible ratchet. Calibration Certificate included, 100% traceability.

Fowler extension rod type Inside Micrometers have a wide measuring range - any one single micrometer can replace many bar type inside micrometers. Range: 2-40" Graduations: .001" Anvil and spindle are hardened and precision ground with microlap finish...

120XP head provides a 3° ratcheting arc to turn fasteners in narrow spaces Low profile tube, 15° flex teardrop head, and flush mounted on/off switch allow for better access in tight confines Digitally tracks torque and angle measurements. Vibrating...

+/-3% CW & +/-5% CCW accuracy. 30-250 Ft/Lbs. and 47.5-345nm Exceeds accuracy range set in ASME B107314-2004 standards. 1/2" drive 36 tooth quick release reversible ratchet. Calibration Certificate included, 100% traceability.

120XP head provides a 3° ratcheting arc to turn fasteners in narrow spaces Low profile tube, 15° flex teardrop head, and flush mounted on/off switch allow for better access in tight confines Digitally tracks torque and angle measurements. Vibrating...