Engine & Battery

Designed to Easily Remove and Install Clic® and Clic-R® Hose Clamps Found on Many European Vehicles. Durable forged construction and dual material grips for comfort. Double-sided tool for removing and installing clamps without damage so they can be...

Required for the timing chain replacement on Volkswagen 12v VR6 engines found in the MK3 & MK4 Golf (GTI), Jetta, Corrado & Passat (B3 & B4). Visit ctatools.com for application details.

Prevent fluid leaks when replacing or working on components that use fluid transfer lines Use to seal transmission cooler, brake, A/C, and fuel lines found on most vehicles The spring loaded design quickly and easily stops the flow of liquids on cars,...

Slim Aluminum handles durable, lightweight and easy to gripConvenient folding drivers store compactlyColor coated wit laser etched markingsChrome vanadium construction.(Metric) 5 to 12MM

Metri Pack Release Tools are available in two sizes and are designed to easily disengage the male terminal from the female housing. Just slide the tip into the housing over the terminal and depress the locking tab to remove the terminal from the...

Disconnect tool is required to remove the fuel line connector from the fuel filter on the GM 5.3L V8 Engine. Applications: Avalanche, Tahoe, Silverado, Savana, Trailblazer and more. Visit ctatools.com for application details.

Services the timing system on 4.0 L SOHC V6 Engine. Required for replacing the timing chain when the poorly designed original Teflon chain guides fail. Signs of failure are heard as a louder engine note during a cold start and between 2400 - 3000 RPM...

Locks camshafts and crankshaft in position when servicing the timing chain and setting engine timing A properly working timing system allows the engine's valves to open and close at the proper times during each cylinder's intake and exhaust strokes...

Chrysler 3.6L Timing Chain Tools   The CRY360 includes 2 Camshaft phaser locks (left and right banks) three timing chain holders (one left bank and two right hand versions) and tensioner pins. The CRY360 includes 2 Camshaft phaser locks (left and...

Set includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups. With the head removed, the slide hammer adapter can be installed to pull the injector sleeve. The brush set properly cleans the...

Removes transmission extension housing bushing. The tool is inserted through the bushing and the drive screw is tightened to draw the bushing out of the housing. Similar to 308-070. Applications include Ford Ranger transmissions: 4R44E/4R55E ...

Removes fuel injectors from engine. The puller legs align around the injector base and the collar is slid down to firmly grip the injector. A slide hammer attaches to the puller, which is used to pull the injector from its seat. The injector puller...