Engine & Battery

Comprehensive tool kit services Ford, Mazda & Lincoln 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L, 3.0L & 3.5L engines (variations of the EcoBoost, Duratec Flex Fuel & GTDI engine models from mid-90's through today Includes: ...

This complete tool set is everything you need for performing the timing service on your Volkswagon/Audi 4.2L V8 engine Includes: Camshaft locking bars TDC lock pin Setting tool for camshaft position sensor rotor ring used during installation of timing...

Used for removal of the direct injection fuel rail without damage. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount assembly. Similar to EN-49248. Applications: 2007-2014...

Removes Broken Exhaust Manifold Studs/Bolts on Dodge 5.7L Hemi motors, minimizing the risk of damaging the cylinder head. Tapered bolts center base plate over bolt holes and slip fit bushing allows you to move from hole to hole without moving base plate...

For R&R of Fuel Filter, Fuel Lines, Engine and Transmission Cooler Lines. Includes #'s 8012 | 5/16" Ford Fuel Filter Remover, 8013 | 3/8" Ford Fuel Line Remover, 8016 | 1/2" Dodge Oil Cooler Line Remover, 8021 | 3/8" Oil Cooler Line Remover, 8022 | ...

Removes Broken Exhaust Manifold Bolts on GM LS III 4.8L, 5.3L and 6.0L Motors Without Damaging the Cylinder Head. Tapered bolts center base plate over bolt holes and slip fit bushing allows you to move from hole to hole without moving base plate. The...

Test-Vac Vacuum Test Kit allows fast, efficient testing and monitoring of many vacuum operated components and also allows one man brake bleeding. The new kit can help find vacuum leaks, test fuel, engine and exhaust valves, door locks, and...

Installs a new solid steel spark plug thread insert in original thread location. Set includes one-piece drill tap, long tap holder, short tap holder, insert installer, swedger and handle. Includes four insert sizes: 5/16", 7/16", 11/16" and 1" (new...

Locks the flywheel while the transmission is removed for service. Comparable to BMW factory tool # 119260.

11mm x 1.5D Honda Head repair kit fixes Head Bolt threads specifically designed for Honda, Toyota and Other Imports The kit provides longer thread inserts for maximum thread engagement Honda head repair kit comes with: 1 Piece HSS drill bit, 1 Piece STI...

Use for securing the crankshaft with the transmission installed (connected to engine) on BMW N20 and N26 engines While replacing the timing chain, this tool can hold the flywheel It helps to release and tighten down the central bolts on the vibration...

Installs the front crank seal with the cover on or off the engine. The bolt is threaded into the crankshaft and the nut is tightened to seat the seal. Similar to EN-50820 & EN48034. Applications: 2013-14 Cadillac ATS, 2014 Cadillac CTS, 2013-14...