Engine Service

Contains styles and sizes to fit domestic and import cars, trucks, and motorcyclesRemove connector pins safely with out damaging wire harnesses or terminal block.

Required for the timing chain replacement on Volkswagen 12v VR6 engines found in the MK3 & MK4 Golf (GTI), Jetta, Corrado & Passat (B3 & B4). Visit ctatools.com for application details.

Prevent fluid leaks when replacing or working on components that use fluid transfer lines Use to seal transmission cooler, brake, A/C, and fuel lines found on most vehicles The spring loaded design...

Quick and easy way to gauge the strength of UREA. Long tube allows fluid to be tested in the vehicle's tank, no need to remove a sample then test with strips. Simple and immediate pass/fail gauge to...

Slim Aluminum handles durable, lightweight and easy to gripConvenient folding drivers store compactlyColor coated wit laser etched markingsChrome vanadium construction.(Metric) 5 to 12MM

Metri Pack Release Tools are available in two sizes and are designed to easily disengage the male terminal from the female housing. Just slide the tip into the housing over the terminal and depress...

Disconnect tool is required to remove the fuel line connector from the fuel filter on the GM 5.3L V8 Engine. Applications: Avalanche, Tahoe, Silverado, Savana, Trailblazer and more. Visit ctatools...

Services the timing system on 4.0 L SOHC V6 Engine. Required for replacing the timing chain when the poorly designed original Teflon chain guides fail. Signs of failure are heard as a louder engine...

Chrysler 3.6L Timing Chain Tools   The CRY360 includes 2 Camshaft phaser locks (left and right banks) three timing chain holders (one left bank and two right hand versions) and tensioner pins. The...

Set includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups. With the head removed, the slide hammer adapter can be installed to pull...

The OTC 6887 Crankshaft Front Seal and Wear Ring Installer installs the front seal and wear ring on crankshaft. It's designed to eliminate lip flare on the wear sleeve and installs the seal properly...

Removes transmission extension housing bushing. The tool is inserted through the bushing and the drive screw is tightened to draw the bushing out of the housing. Similar to 308-070. Applications...