Engine Service

The New Ford 3 Valve Broken Spark Plug Porcelain extractor works to remove broken porcelain from Ford 5.4L engines so the remaining shield can be removed using the Calvan 39100 kit. See the video for more information. Allows user to adhere extractor pin...

Use this fluid with block style combustion testers. Once the color changes, diagnosis of the engine block can be made.

Combustion Leak Detector Quickly Pinpoints Combustion Leaks. Checks for combustion leaks caused by bad head gaskets, cracked blocks, and cracked or warped heads. Fluid changes from blue to yellow when exposed to combustion gases from the radiator...

Allows for easy removal of studs. Tool has two holes: 1/2" (14mm) and 3/4" (19mm) for optimum fit, minimizing damage to threads. Range 3/8" (10mm) - 3/4" (19mm). Design allows tool to grip flush with mounting surface of the stud so it can grab studs...

Used to remove and replace the Injector Pressure Regulator (IPR) on Ford 6.0L and other diesel engines which is located in a very tight location. Tool is built to bottom out on the hex so it does not put torque on the connector, allowing it to be reused...

A stout tool to remove and install plastic fuel tank lock rings from 4" to 7-1/4" without damage. Channel design on body allows the legs to adjust to fit a wide range of applications and keeps the drive centered. Works on the new smaller GM serrated...

This tool is used to remove and install belts on serpentine belt systems using the spring loaded idler pulley Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8" and 1/2" square drive sizes For applications with limited...

Works on OEM Electrical Connectors used on Trucks and Equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and More Also used on some Harley Davidson and industrial equipment connectors Slotted tubes are made from stainless steel which...

Combination removal and installation tool for most stretch belt applications found on many accessory drive systems Unique magnetic faces hold the tool in place on the pulley Helps prevent damage to belt or pulley during removal.

Ratcheting Serpentine Belt Tool Releases Tension on Serpentine Belts With a Spring Loaded Idler Pulley. Ratcheting head with freewheel position allows maximum leverage. Set ratcheting head to the middle or neutral/freewheel position and once maximum...

Removes Damaged Thread and Taps a New Oversize Thread Includes: a piloted drill, spring-loaded tapping tool and 5 magnetic drain plugs The unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leakage Works on...

This Tool Works on Many Ford and Other Electrical Connectors and Terminals. Quickly and easily releases wires without damage to the wires or terminal blocks. The single blades have a bevel ground onto the end for working on small wire terminals found on...