Pullers

M110 Sheppard Pitman Arm Puller

Heavy Duty Yoke Puller

Damage to the drive shaft thread is prevented. Suitable for almost 4- and 5-hole wheel HUBs with a pitch circle diameter up to 136 mm. The "VIBRO-IMPACT" principle: the vibration impact of the pneumatic wrench is transmitted to the wheel HUB and to the...

Pilot Bearing Puller 7/8" - 2" Reach

For use with puller or slide-hammer Includes Pipe Expander, Slide Hammer, 5 Pullers and 3 Extensions

Manufactured to our rigorous specifications to ensure the quality professionals expect from OTC Pressure bearing yoke cap holds jaws in place for ease of set up in any orientation 2 or 3 Jaw application and both external and internal pulling Action Live...

For jobs requiring an inter pull. Four collect sizes: 3/8" to 1/2", 9/16" to 11/16", 5/8" to 1" to 1-1/4", and a 2-1/2" pound slide hammer.

Use For a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers. Set includes drop-forged components, which can be used in a variety of combinations. Contents...

Wide Spread Crossbar with 3 pin-hole; 7-1/4" to 9" 2 pair of long reach jaws gives user reach options of 5-1/2" and 9-1/2" 2 long reach forcing screws (live center) for pushes of 4-1/2" to 10-1/2" Accepts shorter jaws from 4534 kit 7 Ton version of our...

For easy removal of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft. A bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage. A heavy-duty, 3/4" dia...

Use to remove differential side carrier bearing. Works on a wide variety of cars and light-duty trucks. Includes four step plate adapters to fit carrier bearings. Reach: 1-5/8". Spread: 2-5/8" to 3-3/8". Forcing screw is 3/4"-16 mm x 6-11/16" lg. Set...

Includes two popular bearing "splitter" (2" and 3 "), four sts of hex push-puller legs and a bar-type puller head with a 9/16" forcing screw. 5" puller cross-bar with a 6-1/4" forcing screw.