LISLE CORPORATION

11 Offset Steel Blades. Precision blades are offset at the proper angle for adjustment of valve tappets. Blades are approximately 1/2" wide by 4" long.

Used to remove and replace the Injector Pressure Regulator (IPR) on Ford 6.0L and other diesel engines which is located in a very tight location. Tool is built to bottom out on the hex so it does not...

Automatically Adjusts to Strip Insulation From 10 to 24 Gauge Wire. Crimps insulated and non-insulated terminals from 10 to 22 gauge and 7 to 8mm ignition terminals with a size key marked on the tool...

Double-Ended Trim Hook Works on Door Moldings, Dash Trim and Door Seals. Designed to safely pry small bezel components from interiors without damage. Pointed tip fits great in very small gaps. Made...

Cuts and Strips Insulation from 14 to 24 Gauge Wires Crimps 14 to 24 gauge insulated and non-insulated terminals The pliers end grabs wire for twisting and holding A convenient wire gauge key is...

Cuts and Strips Insulation from 8 to 14 Gauge WiresCrimps 8 to 14 gauge insulated and non-insulated terminals. The pliers end grabs wire for twisting and holding. A convenient wire gauge key is...

Features a 3/8" Scissor Style Cutting Blade. Serrated Nose Jaws Strip Seven Wire Sizes which Include 10-22 AWG Wires. It features a 6" length with pliers on the nose for looping wire. Comfortable...

Helps Make a Really Tough Job Easier to Complete. Helps Beat the Flat Rate. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without...

The three piece mini electrical pliers are ideal for cutting, crimping and stripping wire. Designed to work well in tight areas including behind engines, under dashes, or behind seats. Crimp Tool...

Crimp Tool crimps insulated and non-insulated wires 10-22 AWG.

Helpful when Removing Any Type of Interior Trim Including Door Panels and Dash Pieces. Used when replacing glass, installing stereo equipment, body work, and panel replacement. Strong impact...

Use with 56810 or 60610 to Easily and Securely Connect Relay Test Jumper to a Multimeter Can also use banana plug to pin probe adapter with pin probes Kit contains two terminal to banana tip wires,...