Engine Service

Easy reading gauge assures accurate vacuum and pressure check. Dual pressure 0-15, Vacuum .30, (not for Diesel)

Quickly and Accurately Check Compression on Gasoline Engines. Gauge registers 0 - 300 P.S.I. and 0 - 2100 kpa. Fits 14mm and 18mm thread sizes.

Fits Spark Plug Holes with Limited Access. The narrow profile and long length allows access to spark plug holes in confined spaces. Use with a 3/8" ratchet or extension. Size: M14 x1.25 IMPORTANT: Use anti-seize.

The Lisle spring clutch assures a proper fit on the piston and a positive locking action. Range: 2 1/8" to 5".

Small Engine Ring Compressor For Small Cylinders: 1 1/2" to 3" (38.1-76.2mm) Quality tool at a low price.

Valve Ring Compressor

Small Cylinder Hone for 1 3/4" to 2 3/4" (44.5 - 66.9mm) Cylinders. Precision built for small cylinders. Stones are 3 1/2" long, assuring unusual accuracy. Stones cover full range, are easily changed, and available in four grits.

Use with Lisle 15000 These special stones are designed for honing Nikasil plated cylinders found on some ATVs, motorcycles, snowmobiles, waverunners and other small cylinders. Use with a Lisle 15000 Hone to clean and hone the cylinder and produce a...

Terminal Tool for General Motors Eliminate Damaged Wires and Terminals Lisle Wire Terminal Tools are designed to remove wires from terminals without damage to either 14900 is designed for Pack-Con and Weather-Pack terminals on General Motors C3 Systems

Water pump wrench for General Motors Northstar Removes and Installs the water pump assembly on General Motors Northstar 4.0L and 4.6L Engines Turn the tool with a 1/2" drive ratchet or breaker bar Angled teeth prevent the tool from slipping

Fits 1 1/16" switches up to 2 5/8" long, found on newer GM and Chrysler vehicles Fits 1 1/16" oil pressure sending unit (gauge type), found on most all 1991 and newer GM vehicles Also fits 1987 and newer Chrysler vehicles with combination light and...

Oil Pressure Switch Socket Fits 1" and 1 1/16" Switches Up To 1 5/8" Long. One socket with the correct length to fit 1" and 1 1/16" oil pressure switches (for vehicles equipped with warning lights). 1 7/8" overall height for clearance. Use with 3/8" drive