Hand Tools

Set includes: 1", 1-1/16", 1-1/8", 1-1/4", 1-5/16", 1-3/8", 1-7/16", and 1-1/2" in a sturdy blow-molded box Laser etched for easy identification

Fits hydraulic cylinders on vehicles with gland nuts from 2" to 6" / 51 to 152mm (pin to pin). Reverses to work on 17/64" or 21/64" pinholes. Use with 3/4" square drive ratchet or breaker bar.

Fits hydraulic cylinders on vehicles with gland nuts from 1" to 3-3/4" / 25 to 95mm. Reverses to work on 1/4" or 7/32" pinholes. Use with 1/2" square drive tools.

CTA Tools 5160 pry tool strong yet flexible design is ideal for many automotive repair applications. Designed to be used on painted surfaces withouth scratching like steel pry tools might. • 400mm long • Use on Instrument Panels, Door...

Holds the chain and tensioner in position during assembly and disassembly on many VW & Audi vehicles.

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC.

Locks and holds camshafts when adjusting the left and right camshafts Services Audi A4, A6, and A8 (2001 - 2008) with AVK engine Includes holders, Lock Pin Tool, Socket and set of pins Compare to VW/Audi factory tool #T40030

Special bar lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC Lock Pin Tool Applications: VW / Audi V8 with 5 valves per cylinder

Special bar lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC Lock Pin Tool Applications: VW / Audi V6 2.7L and 2.8L with 5 valves per cylinder

Special bar locks camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC Lock Pin Tool Applications: VW / Audi  V6 with 2 valves per cylinder

CTA Manufacturing tool number 2864 for alignment of the cam and crankshafts. Also enables correct installation of the camshaft with the cam cover. Works on models 850, 960, S40, S70 & S90.

CTA Manufacturing tool number 2717 special configuration with 6 internal slots to service Toyotas since 2000. Used on belt tensioner to release pressure when changing serpentine belt. Use with 1/2” square or 7/8” hex drive tools.