Free Shipping Within USA Starting at $199

Win Tools

248731 Replacement U-Joint Assembly for 93642 & 93652 Floor Jacks

(8 reviews) Write a Review
SKU:
W-248731
Availability:
250
Weight:
0.40 LBS
Shipping:
Calculated at Checkout
On Sale
  • Floor jack universal joint
  • 248731 Replacement U-Joint Assembly for 93642 & 93652 Floor Jacks
  • U-Joint pn 248731
  • 248731 Replacement U-Joint Assembly for 93642 & 93652 Floor Jacks
  • Notice the HEX (Hexagon with 6-sides)
  • 248731 Replacement U-Joint Assembly for 93642 & 93652 Floor Jacks
  • 248731 Replacement U-Joint Assembly for 93642 & 93652 Floor Jacks
  • Measurements listed in product description.
  • 248731 Replacement U-Joint Assembly for 93642 & 93652 Floor Jacks
Now: $41.99
Was: $49.99
Frequently bought together:

Description

See our video for installation tips! *Note this has a HEX (Hexagon) end NOT a square! Please don't purchase unless your jack is listed below. Win brand direct replacement for Hein Werner, Black Hawk, and many others that use 248731. This U-joint Assembly 248731 supersedes some of the following part number's- 228356, 228349, 227874, 890-022-666, - Walker, Lincoln, Omega, Mac, Hein Werner - for 93630, 93632, 93642, 93652 and others - Item No. 248731 U-JOINT RELEASE ASSEMBLY, includes 216143 O-Ring as pictured. 

The over-all length is 4.61" (117.31mm) the hexagon diameter is .51" (13mm) the outer edge of the threaded part is .43" (11.11mm). See the parts breakdown for your jack to verify the application.

Universal joint used for many 2 ton up to 3 ton capacity floor jacks. Does NOT fit Craftsman, Michelin, Roush or any Harbor Freights, go to a source that sells those brands for replacement parts. 
 
Fits the Following:
 
* Mac Tools JS642USA
* Lincoln- 93642 - 2 ton floor jack
* Lincoln- 93652 - 3 ton floor jack
* Hein Warner - 93642
* Hein Werner - 93652
* Napa 91-642
* Omega 248731
* Walker 93630
* Walker 93632
 
The 248731 supersedes the following part numbers - 228356, 228349, 227874, 890-022-666. As long as your model is listed, the 248731 is correct. This is an upgraded U-joint and some disassembly may be required, see our video. In fact the smaller ones are no longer available, so that's the reason some disassembly may be needed. See our YouTube video below "Lincoln Jack U Joint Installation - 248731".
 
Question: I bought a U-Joint and installed it but the jack won't go down unless I release the valve all the way and then stand on it. What could be the problem?
 
Answer: The U-Joint has nothing to do with the saddle not lowering properly. You can verify this by removing the jack handle and unscrewing the U-joint further than the normal range. If the saddle stays up this verifies it has nothing to do with the U-joint. I've had the same problem; the jack's saddle not going down unless I stood on it, even with a brand new jack. My problem was the main pivot shaft was causing the sticking. The solution was grease. There is a grease fitting on mine for the main shaft but I was unable to get it to take grease. When using the grease gun, grease should squeeze out from both sides of the shaft if it's getting through completely. I took it apart and removed the shaft. I coated the shaft and the inside of the holes generously with wheel bearing grease. After I reassembled it; I worked the jack a few times and it was better but not perfect. When working it, I had to let the jack handle drop a few times until it started lowering the saddle normally. Now it works great. Another potential cause of the saddle not lowering properly could be weak return springs. But as I said, with mine it was brand new which eliminated that possibility. We recommend when replacing the U-Joint to thoroughly grease the main pivot shaft while it's apart.
 
Question: How many sides are on a hexagon? 
 
Answer: SIX. If you u-joint does not have 6 sides on it this u-joint will NOT work. At this time we don't have u-joints with a square end.
 
Question: Why is this u-joint larger in diameter than the one that came out of my jack?
 
Answer: This is the updated design which is much stronger.
 
Question: The new u-joint will not fit through the housing like my original one. How can I install it if it's too big to fit through the housing? 
 
Answer: Some dis-assembly is required to install the upgraded u-joint on some jacks that have the smaller opening in the housing. See our video that shows how to install if yours's requires partial disassembly. The job can be done in less than 15 minutes in most cases and you'll have a much stronger, beefier u-joint when finished.
 
Quality replacement Universal Joint. FREE USA shipping (3-5 days). U-joint comes with O-ring and plastic Insert. Video can be found on YouTube showing how to install, also see below. Will work on many brands and models from 2 ton up to 3 ton capacity with broken u-joints. This U-joint does NOT fit 1-1/2 or 2-1/2 ton jacks with square ends. Does fit 1-1/2 ton jacks by Walker model numbers 93630 and 93632. See partial application list below. Please verify application by checking the list or comparing the measurements prior to ordering. 
 
Fits the following 2 and 3 ton floor jacks: SNAP ON YA642, YA700, YA700B. Lincoln 93642 and Lincoln 93652 floor jacks. Hein Werner- HW-93642 and HW-93652, also known as HW93642 and HW93652. Napa, Marquette, etc. As long as your model is listed, the 248731 is correct. This is an upgraded U-joint and some disassembly may be required. In fact the smaller ones are no longer available, so that's the reason some disassembly is needed. See YouTube video called "Lincoln Jack U Joint Installation - 248731".
 
 
 
View AllClose

Videos

View AllClose

8 Reviews

  • 5

    Replacement U-Joint

    Posted by Tom D on 21st Apr 2026

    Very east to install, looks and feels heavy duty, not to mention the price was very reasonable.

  • 5

    Product was as shown, fit perfect on my Snap-on floor jack.

    Posted by Ricky Finch on 10th Apr 2026

    I have a floor jack that's been broken for years, and it was out of warranty, hated to throw it away, till I found this web site.

  • 5

    Jack u joint

    Posted by Allan Payne on 4th Feb 2026

    You were the only one that listed the right part. From Wise: Nice! Thanks for the feedback.

  • 5

    U-joint assy for floor jack

    Posted by BK Graham on 7th Dec 2025

    Clear description of what this part fits and don't. Installation instructions were spot on. Both of these are very valuable. Nice part.

  • 5

    Perfect fit and function

    Posted by Tom D. on 10th Jul 2017

    As promised the part fits and my Lincoln floor jack functions like new.

  • 3

    Replacement u joint

    Posted by Ollie H on 15th Dec 2016

    It is too big for my application unable to use. From Management: Unfair rating, since you either purchased this for something it's not intended for. Or, did not read description, the label information or did not watch the video. Here's what you may have missed: This is an updated design which is stronger (bigger diameter) than some of the originals. It requires some disassembly. If your model is one that is listed, it WILL fit. See the video for additional info on how the installation is carried out.

  • 5

    Better than original!

    Posted by Shaun G on 27th Jul 2016

    This is a direct fit name Hein Werner u-joint. The surprising thing is that it looks MUCH better than the one that came in my jack originally. Best price I could find and was shipped in two days to my door. Thanks!

  • 4

    Jack U-joint

    Posted by Richard H on 14th May 2016

    Product worked as described. Wasn't much of a floor jack without the use of the handle for operating. Product purchased and was a direct fit. Would recommend for anyone with this type of jack. Also, the u joint that this replaced appeared to be a lot lighter duty. My jack is a Hein Werner.

View AllClose

Related Products

Related Products

Medium U-Joint Puller
Add to Cart
Quick view

CV907 Medium U-Joint Puller

CALVAN ALSTART

$96.93
For disassembling even the most seized U-joints in minutes on most intermediate trucks, school buses, farm and light industrial vehicles. Eliminates dangerous vice and socket or hammering methods...
Automotive U-Joint Puller
Add to Cart
Quick view

CV905 Automotive U-Joint Puller

CALVAN ALSTART

$69.50
Provides ultimate brute strength for disassembling even the most seized U-joints in minutes on virtually all cars, light-duty trucks and farm machinery. Eliminates dangerous vice and socket or...
U-Joint Puller Kit
Add to Cart
Quick view

OT7057 U-Joint Puller Kit

SERVICE SOLUTIONS U.S. LLC

$678.82
Services Spicer 1600/1610 - 1880 series U-joints and Rockwell 16N, 17N, 18N, and 1710 series U-joints. - See more at: http://www.otctools.com/products/spicer%C2%AE-u-joint-service-set#sthash.aG6Vr4eU...