Win Tools

See our video for installation tips! *Note this has a HEX (Hexagon) end NOT a square! Please don't purchase unless your jack is listed below. Win brand direct replacement for Hein Werner, Black...

The Win 3747-12 Valve Spring Compressor is used in place of the Miller 8426 or 8387 on Jeep, Dodge, Chrysler 3.7 and 4.7 engines. The original Mopar Miller numbers are 8426 and 8387. The Win brand...

Call for faster shipping options. The Win 3747-123 is a combination 3-in ONE similar to the Miller 10102 that does the job of the 8426, 8387 and 8516A used on 3.7 and 4.7 Dodge/Jeep/Chrysler engines...

The Win 3747-13 Chrysler Rocker Arm Tool is used in place of the Miller 8516A on Jeep, Dodge, Chrysler 3.7 and 4.7 engines. The original Mopar Miller number was originally 8516, without the "A"...

E-clip for thread tap that's in 38900 kit to prevent tap from falling into engine if threaded too far. Number 266 permanent high temp and oil resistant thread locker ideal for use on Calvan 389-100...

567617 Ford Timing Chain Locking Tool Wedge. Similar OTC-567617 is same as the Rotunda 303-1175. See the pdf instructions for the Ford 3V Wedge Similar to the 303-1175. Timing chain wedge for Ford...

Ford 3V Phaser holding tool tool, Ford Global tool number is 303-1046. Typically purchased with 303-1175 wedge and 303-1039 valve spring compressor. Partial Application: 2005 – 2012 5.4L 3V...

Equivalent to Loctite 266 high temperature permanent red thread locker. Also oil resistant and is recommended for use with spark plug thread replacement inserts like Calvan 38900 and Time Sert 5553...

Flexible blow gun for easy access through spark plug hole for blowing debris out when performing a spark plug thread repair. Comes with with M Style Air Fitting, which fits most air couplers on air...

Straight blow gun for easy access through spark plug hole for blowing debris out when performing a spark plug thread repair. Comes with with M Style Air Fitting, which fits most air couplers on air...

Rear toe adjustment tool 32-4-200 or part number 324200 also listed as 32-4-200. On 1st generation MINI Coopers (2002-2006) the rear toe angle is adjusted by moving the forward central arm bushing...

Win Tools Volvo Cam/Crank Alignment Kit. Commonly used on Volvo 850, 960, S40, S70 & S90. For alignment of the cam and crankshafts. Also enables correct installation of the Camshafts with...