CTA MANUFACTURING CORP

Use for securing the crankshaft with the transmission installed (connected to engine) on BMW N20 and N26 engines While replacing the timing chain, this tool can hold the flywheel It helps to release...

For removing the plastic fuel tank lid. Use on older Mercedes Benz vehicles from 1976-2000. Applications: E-class (W124) 1984-1996, C-class (W202) 1994-2000 & 300D (W123) 1976-1985.

Used to align and set the rear camshafts on the 1.6L Ecoboost and GTDI engineswhen VCT (Variable Camshaft Timing) phasers have been removed from front end of camshafts. Compare to Ford Factory Tool...

Spring Compressor with detachable end to enable access in tight areas Services Ford 4.0L SOHC V6 and some 4.6L V8's Compare to Ford Factory Tool #T95T-6565-A & #303-1552 Applications: Explorer,...

Locks crankshaft in place during timing belt replacement. Services ’04 – ’10 VW Golf, Jetta & New Beetle with TDI Pumpe Duse. Requires CTA #2769 Lock Pins on some applications. Features new,...

Locks crankshaft in place during timing belt replacement on VW 4 cyl. 1., 9L & 2.0L gas engines, plus 2 & 4-valve diesel engines with oval crankshaft pulley, plus BRM engines with oval pulley...

CTA Tools Volvo Cam/Crank Alignment Kit. Commonly used on Volvo 850, 960, S40, S70 & S90. Used for Alignment of Camshafts and Crankshafts. See the instructions linked pdf below for a...

CTA Manufacturing tool number 2864 for alignment of the cam and crankshafts. Also enables correct installation of the camshaft with the cam cover. Works on models 850, 960, S40, S70 & S90.

Special bar locks camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC Lock Pin Tool Applications: VW / Audi  V6 with 2...

Special bar lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC Lock Pin Tool Applications: VW / Audi V6 2.7L and 2.8L...

Locks and holds camshafts when adjusting the left and right camshafts Services Audi A4, A6, and A8 (2001 - 2008) with AVK engine Includes holders, Lock Pin Tool, Socket and set of pins...

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC.