Engine & Battery

For diesel fuel pressure and vacuum testing on GM 6.6L Duramax engines Gauge assembly with 6-ft. hose and quick coupler 3-1/2inch gauge reads 30 in/Hg to 15 PSI

Used to perform pressure and restriction testing of fuel systems on International engines VT365, T444E, DT466, DT530, and DT570. Contains: two gauges (0 - 100 PSI gauge, and 0 - 30 inHg gauge), a 4-ft. hose and four adapters.

Used to check fuel system pressure on diesel engines with Compucheck test ports. Fits Compucheck test ports on the fuel system of Cummins diesel engines as well as other diesel engines that have been outfitted with the Compucheck test ports. Six-foot...

Used to test fuel pressure between the lift pump and the injection pump on diesel engines. Includes 100 PSI gauge assembly with 4-ft. hose, pressure relief valve and 6-ft. clear PVC tube, 5 banjo bolt adapters ranging from 8mm to 14mm and 1 Repair Kit...

The Spill-Free Funnel eliminates trapped air pockets which can cause erratic cooling system and heater performance. It controls the amount of coolant entering the system and enables unattended filling of the cooling system. Improved with a Straight...

Controlled pressure assures positive, adjustable contact through full range. Operates with any electric drill. Furnished with 3" long 220 grit stones Adjustable stop collar permits quick selection of two range settings, from 2" to 4" and from 4" to 7"...

Extra Low Profile Design Quickly and Easily Disengages the Most Popular Size of Jiffy-tite Quick-Connect Fittings Without Removal of the Clip. Teeth of the tool fit perfectly into tight tolerance of Jiffy-tite® connectors and when rotated allow the line...

Locks Flywheel in place when removing harmonic balancer on 6.6l duramax engines with Allison automatic transmissions. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. On 2500 and...

Easy reading gauge assures accurate vacuum and pressure check. Dual pressure 0-15, Vacuum .30, (not for Diesel)

Quickly and Accurately Check Compression on Gasoline Engines. Gauge registers 0 - 300 P.S.I. and 0 - 2100 kpa. Fits 14mm and 18mm thread sizes.

Fits Spark Plug Holes with Limited Access. The narrow profile and long length allows access to spark plug holes in confined spaces. Use with a 3/8" ratchet or extension. Size: M14 x1.25 IMPORTANT: Use anti-seize.

The Lisle spring clutch assures a proper fit on the piston and a positive locking action. Range: 2 1/8" to 5".