LISLE CORPORATION
LS51450 Harmonic Damper Puller
- SKU:
- LS51450
- UPC:
- '083045514503
- MPN:
- 51450
- Condition:
- New
- Availability:
- In Stock
- Weight:
- 2.69 LBS
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$88.22
Was:
— You save
Description
Harmonic Damper Pulley Puller For Chrysler, GM, Mitsubishi and Dodge. Low profile design works in confined spaces eliminating the need to remove the radiator. Equipped with magnetic jaw spacers for 5.9 liter Dodge. New jaw geometry, slimmer magnetic spacers and a fourth rod allow use on 4.2L Trailblazer, Envoy and Bravada 03 and newer, 4.2L Buick Rainier 04 and newer, 3.5L Colorado and Canyon 04 and newer, Hummer H3 06 and newer, 2.8L Colorado and Canyon 05 and newer. Jaws are now held in place with a clevis pin and can be removed and replaced easily. Includes 49520 Clevis Pin 51640 Jaw 51670 Magnet and Housing Assembly 51680 6.5" Rod
View AllClose
Related Products
LS45500 Harmonic Balancer Puller
LISLE CORPORATION
MSRP:
Now:
$35.88
Was:
Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft.
OT6667 Harmonic Balancer Puller
SERVICE SOLUTIONS U.S. LLC
MSRP:
Now:
$96.15
Was:
Designed for removing damper pulleys in tight engine compartments, without removing the radiator. Use on the following: GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s. Also works on...
LS54870 Hemi Harmonic Balancer Puller Puller Set
LISLE CORPORATION
MSRP:
Now:
$27.33
Was:
Adaptors for use with Lisle brands and some other harmonic balancer pulley kits Includes jaws and spacer washers
PMW151P Harmonic Balancer Puller Set
WILMAR
MSRP:
Now:
$16.10
Was:
Easily removes harmonic balancer. Drop forged alloy steel. Assorted bolts. Helps stop damage to pulley and shaft. Includes 14 - Bolts: 3 - 5/16-18 x 3 in, 2 - 3/8-6 x 3 in, 3 - 3/8-24 x 3 in, 3 - 8mm...
AO78450 HD Harmonic Crank Pulley Puller
ASTRO PNEUMATIC TOOL CO.
MSRP:
Now:
$65.73
Was:
HD Harmonic Crank Pulley Puller
Customers Also Viewed
OT6667 Harmonic Balancer Puller
SERVICE SOLUTIONS U.S. LLC
MSRP:
Now:
$96.15
Was:
Designed for removing damper pulleys in tight engine compartments, without removing the radiator. Use on the following: GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s. Also works on...
LS50750 Offset Adjustable Oil Filter Plier
LISLE CORPORATION
MSRP:
Now:
$28.03
Was:
Slip Joint Handle for Greater Range. Two-position, slip-joint handle produces the range of three separate conventional filter wrenches. Overall range 2 1/4" to 4". Jaws are bent at a 20° angle to fit...
LS49960 Lockable Air Tool Holder
LISLE CORPORATION
MSRP:
Now:
$20.83
Was:
Tool can hold up to five pneumatic tools in a 10" space. Comes with five slots that fit all popular quick connect fittings from Milton, Lincoln, Amflo and others. Can be mounted on a tool box, cart...
LS35800 6 Piece Aluminum Disconnect Set AC and Fuel Lines
LISLE CORPORATION
MSRP:
Now:
$80.47
Was:
Durable Aluminum Disconnects Work on Air Conditioning Lines and Quick Connect Fuel Lines. Disconnect spring lock couplings on Ford and Chrysler air conditioning lines. Also works on fuel line quick...
LS42810 Recessed Plastic Clip Removal Pliers
LISLE CORPORATION
MSRP:
Now:
$17.77
Was:
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins. Needle nose pliers design fits into recessed pin locations found on some GM vehicles. Designed to prevent damage to the pin...
LS49750 Magnetic Green Air Hose Holder
LISLE CORPORATION
MSRP:
Now:
$14.21
Was:
Strong Magnet Attaches to Ferrous Metal Surfaces to Keep Most 3/8" to 1/2" Shop Air Hoses off the Floor, Clean and ccessible. Bright powder coat finish for visibility and durability. The tool can...
On Sale

OTC 522902 Secondary Timing Chain Holder for Jeep Dodge 4.7 Liter
SERVICE SOLUTIONS U.S. LLC
MSRP:
Now:
$39.06
Was:
$49.51
The OTC 522902 Secondary Timing Chain Holder is a replacement tool that is part of a larger kit, PN OT6689 which is for the 4.7L V-8 1999-2006 Jeep and Dodge (see a more complete...
KD3625 5 Ton Ratcheting Puller
APEX TOOL GROUP
MSRP:
Now:
$106.13
Was:
Anti-mushrooming head, allows socket to continue to fit on head after it's been tapped down Innovative geared jaws make positioning very simple Quick change jaws for 2/3 jaw and internal/external...
KD2897 Pulley Puller and Installer Set
APEX TOOL GROUP
MSRP:
Now:
$70.05
Was:
Pulley Puller and Installer Set Remove pressed-on alternator and power steering pulleys on late-model GM, Ford and Chrysler engines. The puller fits some AMC's. Will not work on 3.3L and 3.5L...
LS60200 6.5" Heavy Duty Strap Filter Wrench
LISLE CORPORATION
MSRP:
Now:
$20.50
Was:
Use with 1/2" drive to remove or install filters and other objects up to 6-1/2" in diameter. 3-5/8" long yoke fits into tight areas.