B900-0199 Broken Glow Plug Removal Tool
- In Stock
- 4.90 LBS
- Calculated at Checkout
269.99 Free Shipping. Baum Specialty Tool B-900-0199 Broken Glow Plug Remover tool kit. Used to remove broken glow plugs right over the fender without removal of the cylinder head. The kit comes with M5x0.8 tap for making threads into the center shell of the glow plug to allow the M8x0.8 puller screw to be installed. It also has an M8x1.0 thread tap and an M10x1.0 tap used for cleaning up (or chasing) the threads in the head for the glow plug. The tools in this kit are a great time saver because it's used to help prevent the need of removing the cylinder head to extract a broken injector. *Note this kit is designed for European models like VW's and Sprinters, however some of our customer's have reported that they have used this kit successfully on the Duramax Diesel as well.
As of March 4, 2016 - Wise Auto Tools includes a free 1/4" tap and two 1/4" puller screws that works better for some Duramax glow plugs that have a larger internal housing. We are also including the M10x1.25 Thread Chaser that works on Duramax Glow Plug threads.
Glow Plug threads should not be harmed when this kit is used properly. We also recommend the 1074 Glow Plug Removal Tool for the ones that are not broken. Customers tell us that this helps prevent breaking to begin with. If removing ones that are not broken see the 1074 product listing. Also see the 7730 thread repair kit if needed after removal of the broken glow plug.
Have this shipped to Canada. We use UPS which usually takes 2-3 business days. We have no control on how long customs clearance may take or amount of duty fees.
- Ratchet T-Bar
- Drill Bit 9 x 4.2mm
- Drill Bit 7 x 4.2mm
- Top connection removal star socket (9.2mm square socket)
- Allen key 3mm
- 6 x 3.5 x 40 L Pilot drill centering sleeves QTY 2
- Tap M10x1.0 *Drill bits are considered consumable and replacements are available separately B900-0199/Pair.
- Tap M8x1.0
- Tap M5x0.8
- Spindle or puller screw M5x0.8 QTY 2
- Pilot drill bits 3.5 QTY 2
- Puller outer housing (Hex 12mm spindle) (Hex 30mm Force nut) (Cone center tool)
- Drill installer or drill holding adapter
BONUS from Wise - Not pictured - Also note color of case may be blue instead of red as pictured.
- Tap M10x1.25
- Tap 1/4"-2
- Spindle or puller screw 1/4-28 QTY 1
Since skill levels of technicians can vary greatly we cannot guarantee personal success. However, we can say that our customers that do fleet service on Sprinters love this tool kit. *Note we cannot accept returns on used kits. We only accept returns on new sell-able tools. See our policies for more details. Drill bits, taps, mandrels etc are considered to be consumables in the tool industry. Parts in this kit are not warrantied due to the nature of the tools.
Used this tool on a LLY Duramax worked perfectly didn't have any trouble only problem it that the M10x1.25 tap does not fit in the long reach tap handle so had to use a different handle worked great no damage to the threads.
Made a potentially very expensive job, not to mention a very scary job, really easy. Well, as easy as possible. It worked great! It drilled the threads right out of the head without damaging the cylinder head and then tapped the remaining shank and pulled it right out with no fuss. I highly recommend this kit if you have broken glow plugs.
Worked excellent. Saved tons of labor from not having to pull the head.
Worked like it said it would and saved taking the head off. Was held up at Canadian customs for good week which was annoying. From Wise: Hi Charlie, sorry about the delay in customs. Most of the time using the post office customs doesn't take long compared to UPS. Glad the kit worked well at least and thanks for the review. Dennis
I bought this tool to remove broken plug on Sprinter 2008 3.0L. And was waiting for over a week to get to Canada from the USA! Nice kit though. The only set back was the drill bit. They are so brittle, the tip shattered and is not sharp as I thought. I used Mac tool drill bits for remaining, I’m expecting quality drill set for the money and usage in a shop! Hopefully Wise Auto Tools will improve these drill set? As a technician I don’t mind buying tools, but then again drill bits always break! But quality drill bits and experience will make a big difference. From Wise: First, we would caution people about using regular drill bits for this job, since the bits in the kit are stepped for piloting. Sorry there was an issue with one of the bits. Compared to competitors, our bits hold up well unless there's a burr that catches the tip. With that being said, drill bits are a consumable item and can break or get dull even with careful use. For this reason the manufacturer does not warranty them. However, we understand the frustration considering you had a problem so early on. We recommend getting extra drill bits since they are susceptible to wear or breakage. In 2018 we hope to offer shipping for this product from Canada so there won't be as long of a wait time for our Canadian customers. Custom delays will be eliminated when we are able to stock some of these kits in Canada. Thanks again for your feedback.
This tool is just as stated does the job as well as a machine shop can and saved me the time of pulling head. Thanks
Work for Coca-Cola Fleet shop, we have a couple hundred Sprinters, they all have the 3.0l 642 Engine. I called Wise up on a Saturday morning, tool was here Monday afternoon, Used it as shown with instructions and glow plug was removed and extracted, the drill bits used and taps were top notch and high quality. The t handle for the tap is a ratchet and works amazing. The drill bits fit in a guide rod so the error of a mis-drilled hole are not an issue. Comes with 2 different guides for different size glow plug ends or if one is larger due to wrong plug installed. I recommend this tool for any Sprinter or GM Duramax owners or shops.
Mercedes dealer broke tool off in glow plug and told customer that it's NOT repairable and I would break my tool off also. Made dealer remove their tool. I drilled out and extracted in 5 minutes. I was very impressed.
Bought this kit and was impressed with the quality. You get what you pay for, so beware of cheap China kits that are inferior quality and take forever to ship, because they come by slow boat! Talked to Dennis and was able to get a 1/4" tap and puller screws as well as an M10x1.25 thread chaser for Duramax. I recommend getting the extra drill bits, since they can get dull or break. They are not warranteed. The kit is actually made for Sprinter engines (not one made for Duramax) but I was able to space the puller with a 1/4" socket so it pulled evenly. Otherwise the puller screws could bend. Threads were not damaged for glowplugs, but I see Time Sert kits available just in case. Saved a lot of time. Over-all nice kit.
I used this tool set on a 2005 Duramax and it worked just fine had no issues and was able to extract the glow plugs with no problem I would definitely recommend this to anyone. I want to thank Dennis for the help.