OTC ROBINAIR BOSCH

Pitman Arm Puller Set

Used for removal of the direct injection fuel rail without damage. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount...

Designed to compress parking brake springs and hold them in a compressed position while servicing the brake cable or other brake components.Ford and Dodge Truck applications.

Makes replacing engine drive belts and starter generators easier. This tool compresses the belt tensioner spring during engine drive belt replacement and starter generator servicing. Applications...

OTC GM 2.8L and 6.6L Diesel Fuel Line Release Tool Save time servicing fuel line bundle or replacing fuel lines. This quick-connect release tool is designed to separate the 4.8mm (3/16 inch)...

OTC GM Truck and SUV Crankshaft Seal Remover Save time removing crankshaft rear seals, preventing damage to the block and crank. This seal remover is a special puller with three jaws designed to...

OTC Crankshaft Rear Seal Installer Prevent leaks by properly aligning and installing crankshaft rear seals. This seal installer is a two-piece tool that mounts to the crankshaft and places force on...

OTC GM Injector Seal Installer and Sizer Adapters Ensure replacement injectors and seals are installed correctly. This kit installs the Teflon seal onto the end of the injector. The pilot cone is...

GM Duramax Injector Puller

Designed to pull injectors on a GM Duramax 6.6L engine, 2005 - 2011. Similar to J-46594 -J46594

Diagnose all GM 5/16" EVAP line systems. This adapter connects into the EVAP system line at the canister quick-connect fitting. An EVAP port fitting allows EVAP system testing and diagnosis. Use with...

Designed to separate oil pan seals, the cutter is pressed into the sealant and struck with a hammer to cut through the oil pan seals. Other methods may damage the oil pan and/or sealing surfaces...